Split-Mount-Indoor
FibeAir IP-20GX
Ausgestattet mit einer MEF 2.0-zertifizierten Carrier-Ethernet-Engine sowie einer fortschrittlichen TDM-Services-Verarbeitungs-Engine ermöglicht Ihnen der FibeAir IP-20GX Assured die Bereitstellung sowohl von IP- als auch von herkömmlichen TDM-Services.
Das System erfüllt die Sicherheits- und Verfügbarkeitsanforderungen unternehmenskritischer Netzwerke mit seinem erweiterten Funktionsumfang, der physische Sicherheit, Verkehrsverschlüsselung, Anti-Malware, Identitätsmanagement, zentrale Authentifizierung, Ereignisprotokollierung sowie sichere Produktarchitektur und -entwicklung bietet.
PRODUKT-HIGHLIGHTS
compact, expandable, 1 RU
6x 1GbE / 16 & E1
2x IF RFU interface in baseline
2x Slot for RFU IF/ E1 / STM-1
Assembly options
Two expansion slots for any combination of:
- Radio Modem Cards (RMC) – RMC-B
- TDM Line Cards (LIC)
- TDM – LIC-T16 (16x E1)
- TDM – LIC-T155 (1x ch-STM-1)
Radio
Supported Frequency Range
6-42 GHz
Radio Configurations
1+0, 2+0 SP/DP, 4+0, 1+1 HSB, 4 x 1+0
Radio Features
- Multi-Carrier Adaptive Bandwidth Control (up to 2+0)
- Protection and Diversity: HSB, SD (BBS)
- High spectral utilization: QPSK to 2048 QAM w/ACM
- XPIC
- Ethernet
Ethernet Features
- 2 x 10/100/1000Base-T Electrical (RJ-45)
- 2 x 10/100/1000Base-T Dual Mode Electrical or Cascading (RJ-45)
- 2 x 1000base-X (SFP)
Management Interfaces – 2 x 10/100 Base-T (RJ-45)
SFP Types - Optical 1000Base-LX (1310 nm) or SX (850 nm)
Ethernet Features
MTU – 9600 Bytes
Quality of Service
- Multiple Classification criteria (VLAN ID, P-bits, IPv4 DSCP, IPv6 TC, MPLS EXP)
- 8 priority queues per port
- Deep buffering (configurable up to 64 Mbit per queue)
- WRED
- P-bit marking/remarking
4K VLANs
VLAN add/remove/translate
MSTP, ERP (ITU-T G.8032)
Frame Cut Through – controlled latency and PDV for delay sensitive applications
Header DeDuplication – Capacity boosting by eliminating inefficiency in all layers (L2,MPLS, L3,L4, Tunneling – GTP for LTE, GRE)
Y.1731 Ethernet OAM
TDM
TDM Interfaces
16 x E1s (optional)
TDM Features
Fixed interface: 16 x E1s
Expansion Slots (Optional): 2 x LIC-T16 (16xE1) and/or LIC-T155 (1xch-STM-1)
Synchronization
Synchronization Distribution
Sync Distribution over any traffic interface (GE/FE, E1*, STM-1)
Dedicated In/Out synch interface (E1/2 MHz)†
SyncE (ITU-T G.8261, G.8262)
SSM/ESMC Support for ring/mesh applications (ITU-T G.8264)
SyncE Regenerator mode, providing PRC grade (ITU-T G.811) performance for smart pipe applications
IEEE-1588
Optimized Transport for reduced PDV
IEEE-1588 TC
IEEE-1588 BC*
Standards
MEF
Carrier Ethernet 2.0 (CE 2.0)
Supported Ethernet Standards
10/100/1000base-T/X (IEEE 802.3)
Ethernet VLANs (IEEE 802.3ac)
Virtual LAN (VLAN, IEEE 802.1Q)
Class of service (IEEE 802.1p)
Provider bridges (QinQ – IEEE 802.1ad)
Link aggregation (IEEE 802.3ad)
Auto MDI/MDIX for 1000baseT
RFC 1349: IPv4 TOS
RFC 2474: IPv4 DSCP
RFC 2460: IPv6 Traffic Classes
Supported E1 Standards
ITU-T G.703, G.736, G.775, G.823, G.824, G.828, ITU-T I.432, ETSI ETS 300 147, ETS 300 417
Supported STM-1 Standards
ITU-T G.703, G.775, G.813, G.825, EN 300 386 V1.2.1, ES 201 468; V1.1.1 :2000-03, ES 201 468 V1.2.1 :2002-09, EN 61000 4-3
TDM Pseudowire Standards
SAToP – RFC 4553
Security
Radio Encryption – AES 256
Secured protocols:
HTTPS
SNMPv3
SSH
SFTP
RADIUS authentication and authorization
Standards Compliance
Radio Spectral Efficiency: EN 302 217-2-2
EMC: EN 301 489-4, EN 301 489-1, FCC 47 CFR, part 15, class B
Safety: EN 60950-1, IEC 60950-1, UL 60950-1, CSA-C22.2 No.60950-1, EN 60950-22, UL 60950-22, CSA C22.2.60950-22
Ingress Protection: IEC 60529 IP56
Storage: ETSI EN 300 019-1-1 Class 1.2
Transportation: ETSI EN 300 019-1-2 Class 2.3
Technical Specifications
Mechanical Specifications
IDU: 44mm(H), 426mm(W), 180mm(D), 2.5kg
Plugin Card Weight: 0.5kg
Fans Drawer Weight: 0.3 kg
RFU-C – 200mm(H), 200mm(W), 85mm(D), 4kg;
1500HP/RFU-HP – 490mm(H), 144mm(W), 280mm(D), 7kg(W) (excluding Branching)
1500HP/RFU-HP OCB Branching (Split Mount and Compact All-Indoor) – 420mm(H), 110mm(W), 380mm(D), 7kg per carrier
Environmental Specifications
IDU: -5° to +55°C (-25°C to +65°C extended); RFU: -33°C to +55°C (-45°C to +60°C extended)
Power Input Specifications
IDU Standard Input: -48 VDC
IDU DC Input range: -40 to -60 VDC
Dual-feed power support
Power Consumption Specifications
IDU with full assembly (expansion slots not populated): ~48W
Addition per RMC in expansion slot: 17W
Addition per LIC-T16 (16xE1) in expansion slot: 17W
Addition per LIC-T155 (1x ch-STM-1) in expansion slot: 25W
RFU-C – 6-26 GHz (1+0/1+1): 22W/39W; 28-42 GHz (1+0/1+1): 26W/43W
RFU-HP (6-8 GHz) – Max Bias: 73W; Mid Bias: 48W; Min Bias: 34W; Mute: 18W
RFU-HP (11 GHz) – Max Bias: 74W; Mid Bias: 64W; Mute: 21W
1500HP – Max Bias: 85W; Mid Bias: 72W; Mute: 29W