Die IP-20V mit 2,5GBit/s arbeitet im lizenzfreien V-Band im Bereich 57-66GHz. Die IP-20V ist ultrakompakt, hat hohe Kapazität und geringe Latenz und ist ein All-Outdoor Gerät. 

• Datenrate bis zu 2,5GBit/s 
• Vermeiden Sie Frequenzgebühren durch die Verwendung von lizenzfreiem V- 
• BandBereitstellung einer zukunftssicheren, ultrahohen 4,5G- und 5G-Funkkapazität von bis zu 2,5 Gbit/s 
• Nutzen Sie eine FDD-Lösung mit niedriger Latenz 
• Minimieren Sie den Platzbedarf Ihrer Standorte mit einer integrierten Flachbildschirmantenne

Ca. Reichweite/Datendurchsatz bei: 99,99% Verfügbarkeit   
228m = 2,5 Gbit´s 
305m = 2,0 Gbit´s 
377m = 1,52 Gbit´s 
424m = 1,12 Gbit´s 
538m = 755 Mbit´s 
691m = 362 Mbit´s 
843m = 180 Mbit´s 
Radio 

Supported Frequency Range 
57-66 GHz 

Radio Configurations 
1+0 

Radio Features 
BPSK to 256 QAM w/ACM 

Ethernet 
Ethernet Interfaces 
Port 1: 
Electric: 10/100/1000Base-T RJ-45. 
Proprietary PoE or external DC support (adapter) 

Port 2:
SFP cage which supports – Regular and CSFP standards 
Regular SFP provides Eth2 
CSFP (Dual BiDir SFP) provides Eth2 and Eth3 

Port 3: 
Three hardware options: 
1 x 10/100/1000Base-T (RJ-45) used for management only; OR 
SFP cage supporting Regular SFP – single ETH interface; OR 
SFP+ cage supporting a 10GE single ETH interface. Notes: Port numbering differs for different
hardware models. SFP devices must be of industrial grade (-40°C to +85°C, -40°F to +185°F). 

Ethernet Features 
MTU – 9600 Bytes 
Quality of Service 
Multiple Classification criteria (VLAN ID, P-bits, IPv4 DSCP, IPv6 TC, MPLS EXP) 
8 priority queues per port 
Deep buffering (configurable up to 64 Mbit per queue) 
WRED 
P-bit marking/remarking 
4K VLANs 
VLAN add/remove/translate 
Frame Cut Through – controlled latency and PDV for delay sensitive applications 
Y.1731 Ethernet OAM 
Header DeDuplication – Capacity boosting by eliminating inefficiency in all layers (L2, MPLS, L3, L4, Tunneling – GTP for LTE, GRE) 
Adaptive Bandwidth Notification (ABN, also known as EOAM) 

Synchronization 
Synchronization Distribution 
Sync Distribution over any traffic interface (GE/FE) 
SyncE (ITU-T G.8261, G.8262) 
SSM/ESMC Support for ring/mesh applications (ITU-T G.8264) 
SyncE Regenerator mode, providing PRC grade (ITU-T G.811) performance for smart pipe applications 
IEEE-1588 
Optimized Transport for reduced PDV 
IEEE-1588 TC 

Antenna 
Antenna Gain: 38 dBi 
ETSI EN 302 217-4-2 V1 5.1 CLASS 2 
Cross Polarization: 30 dB 

Standards 
MEF 
Carrier Ethernet 2.0 (CE 2.0) 
Supported Ethernet Standards 
10/100/1000base-T/X (IEEE 802.3) 
Optical 10Gbase-X (IEEE 802.3) 
Ethernet VLANs (IEEE 802.3ac) 
Virtual LAN (VLAN, IEEE 802.1Q) 
Class of service (IEEE 802.1p) 
Provider bridges (QinQ – IEEE 802.1ad) 
Link aggregation (IEEE 802.3ad) 
Auto MDI/MDIX for 1000baseT 
RFC 1349: IPv4 TOS 
RFC 2474: IPv4 DSCP 
RFC 2460: IPv6 Traffic Classes 

Standards Compliance 
Radio Spectral Efficiency: EN 302 217-2-2 
EMC: EN 301 489-1, EN 301 489-4, Class B (Europe), FCC 47 CFR, part 15, class B (US), ICES-003, Class B (Canada), TEC/EMI/TEL-001/01, Class B (India) 
Surge: EN61000-4-5, Class 4 (for PWR and ETH1/PoE ports) 
Safety: EN 60950-1, IEC 60950-1, UL 60950-1, CSA-C22.2 No.60950-1, EN 60950-22, UL 60950-22, CSA C22.2.60950-22 
Storage: ETSI EN 300 019-1-1 Class 1.2 
Transportation: ETSI EN 300 019-1-2 Class 2. 

Technical Specifications 
Mechanical Specifications 
Dimensions (38dBi Integrated Antenna) – 337mm x 281mm x 107mm, 4.2 kg. 13.27’’ x 11.06’’ x 4.21’’, 9.26 lbs. 
Pole Diameter Range– 6cm – 11.4cm; 2.36” – 4.48” 

Environmental Specifications 
-33°C to +55°C (-45°C to +60°C extended)  

Power Input Specifications 
Standard Input: -48 VDC; DC Input range: -40.5 to -60 VDC 

Power Consumption Specifications 
Up to 250 MHz – 33W; 500 MHz – 37W 

PoE Injector Mechanical Specifications 
134mm(H), 190mm(W), 62mm(D), 1 kg. 5.28”(H), 7.48”(W), 2.44”(D), 2.2 lbs. 

PoE Injector Environmental Specifications 
-33°C to +55°C (-45°C to +60°C extended) 

PoE Injector Power Input Specifications 
Standard Input: -48 or +24 VDC (Optional) 
DC Input range: ±(18/40.5 to 60) VDC (+18VDC extended range is supported as part of the nominal +24VDC support) 

PoE Injector Interfaces 
GbE Data Port supporting 10/100/1000Base-T 
Power-Over-Ethernet (PoE) Port 
DC Power Port –40V to -60V (a PoE supporting two redundant DC feeds each supporting ±(18-60)V is available)